Warwick Fabric Care & Cleaning

Warwick Fabric Care & Cleaning

Cleaning Guide

Spot cleaning
Treat spills and stains as soon as possible. Test on hidden area to ensure fabric and colour are not removed. Gently scrape any soil or mop any liquid from the surface of the fabric. Use of soap or detergent with water should be approached with caution since overzealous rinsing to remove soap residue may result in over-wetting, water marking and possible wetting of substructure (this may create other stains or damage products).

  1. For non-oil-based stains use warm water and non-toilet soaps which do not contain optical brighteners (consider Velvet soap, Lux Flakes, Softly). Mix a small amount of soap and warm water solution and apply to the stain, rubbing gently. Blot dry with a clean towel. Apply cool water (preferably filtered or distilled water) and blot dry again. Then with a hair dryer, working out from the centre of the stain, dry quickly to prevent rings forming. It is generally preferable to clean whole panels of fabric in this way rather than trying to spot clean specific areas.
  2. For oil-based stains following the same basic guidelines as above, apply a proprietary brand solvent based cleaner and try to clean generally in panels rather than spot cleaning specific areas. A helpful industry ‘secret’ for spot removal of oil based biro marks is by the application of conventional hair spray or Glen 20.

A First Aid Kit for Fabrics
To further enhance spot cleaning results, Warwick have introduced the Halo Fabric Care Kit which includes Halo spot cleaner for most household stains, Halo fabric deodoriser to help neutralise pet and general odours and Halo fabric protector to restore liquid repellency on fabric sections that have been spot cleaned

*For treatment of specific stains, see Stain Removal.

Professional fabric servicing
Warwick Fabrics recommend that water-based 'Fluro chemical' type fabric protectors (such as DuPont Teflon® and 3M Scotchgard®) be applied by licensed applicators only. Check your care label first to see if a mill-applied protection was incorporated during fabric manufacture. Fabric protectors do not eliminate the need for vacuuming, routine cleaning or proper care. They will, however, make spot cleaning and vacuuming quicker, easier and more efficient between professional cleans and keep your fabric looking cleaner longer, as well as extending its life. Professionals applying fabric protectors must always pre-test to qualify fabric suitability.

Warning
Extreme caution should be taken if considering treatment of velvets and pocket weaves with stain repellent products. Some high pile velvet and pocket weave jacquards may change in surface character if stain repellent treatments are incorrectly applied. Extra care should be taken to pre-test for these fabrics.

Professional cleaning frequency
Is determined by the furniture use, your own maintenance, upkeep and environmental conditions. As a good 'rule of thumb' overall cleaning is recommended every 12 months for most family room lounges.

Velvet curtain care
Curtaining velvet needs care in handling and use. Window fittings coming in contact with the curtain should be avoided. Stiff brushing or strong vacuum cleaning on the reverse side of velvet can also pull at the pile. Draw cords or other methods of drawing without handling the curtain itself are recommended, as grasping, particularly with fingernails, can cause crushing and other damage. Velvet curtains should be dry cleaned.


Related Articles